ElectroCoagulation

Electrocoagulation (Electro meaning to apply an electrical charge to water and Coagulation meaning the process of changing the particle surface charge, allowing suspended matter to form an agglomeration) is an advanced and economical water treatment technology.  It effectively removes suspended solids to sub-micron levels, breaks emulsions such as oil and grease or latex, and oxidizes and eradicates heavy metals from water without the use of messy filters or the addition of separation chemicals.

Oil-Trap-EP-5-2

System can treat 10 to 40 gallons per minute

 

Fluid Degases causing Solids to drop out of suspension

Fluid Degases causing Solids to drop out of suspension

Total Waste Water & Sludge Disposal

Description

AS 100 is a solid, granular super-absorbent polymer that rapidly absorbs and retains aqueous matter. QS LQ 100 is made from a non-biodegradable polymer that is designed for use on waste that fails the Paint Filter Liquids Test (PFLT).

Liquid_SludgeAdding_PolymerOLYMPUS DIGITAL CAMERA

A small amount added to waste water turns to solid mass encapsulating solids.Meets all standards for solid disposal you may simply place in a dumpster.

Call us today at 866-540-7575 for a no obligation assessment of your cleaning needs and to discuss the optimal cleaning configuration for your application. We can help you save time and money plus do the job better.

QS-Jet-Spray-Washer-Compound

QS Jet Spray Washer Compound #229

Our QS Jet Washer Compound #229is an aluminum safe metal cleaner is equally effective on both ferrous and non ferrous metals.  It is designed for all types of hot jet spray cabinet washers.

QS #229 Detergent has a rust inhibitor added to the formula to help prevent spray cabinets and parts from rusting.  It will not damage plastics, rubber or fabrics. It is safe on the following metals: aluminum, iron, zinc, cadmium, lead, magnesium, chromium and mild and stainless steel.

 

Soak Tank Cleaning: Mix 1/2 to 1 pound to every gallon of water.

Spray Cabinet Washer: Mix 1/4 to 1/2 pound to every gallon of water depending on soil load

Injector Soap for pressure washer: Mix 10 lbs into 5 gallons hot water when dissolved pour into a clean 55 gallon drum and fill with fresh water.  You now have 55 gallons of injector soap.

Biodegradable.

Free rinsing.

Low foam allows for spray cabinet usage.

No irritating fumes.

Non-caustic.

Non-toxic.

Penetrates heavy grease and soil build-up.

Safe on aluminum and other soft metals.

USDA approved.

Packaged in 40 lb  and 400 lb drums